Cedral Terrace

Measurements

Want to create a complex shape? Use the button below to add a section to your existing shape. The existing shape will light up, and you have to select a lateral side where you want the new section to be added.

You can always decide to cut out a section that you need for a swimming pool, a tree, a grass area, ... . Use the below button to cut it out on the 2D plan. A cut out section is always either beginning on the border or at least 63 cm away from it.

Style

Patterns

Joints

Colors (only visible in 3D)

Plank finishing

Go to the 2D-plan and click on a lateral side to add a finishing plank, click again to remove it.

Subconstruction

Calculate material list

back arrow Bill of materials

Receive summary by email

Space between dots

1m

Space between dots

Total Area

m²
Close

Download PDF right away

The Cedral Terrace calculator has generate a ball park estimate of the costs of the necessary (Cedral) materials for your project. Should you wish to receive a quote, please select one from the option below:

Close

Clips

The fixing of the decking boards in the decking area on the substructure is done invisibly with the Cedral mounting clamp and the corresponding screw.

Clips
Close

Joints

The distance between the head joints of the planks must be at least 3 mm. Practical tip: use a folding rule as a spacer.

Joints
Close

Start End Clips

To fasten the first or last plank, use the Cedral start/end clamp and the corresponding screws. Alternatively, the planks can be fastened with correspondingly longer, visible screws. A distance of 20 mm from the building or other fixtures must be observed. If a free projection of the decking boards over the substructure is necessary, this must also be max. 20 mm.

Start End Clips
Close

Visible Screw

If the finishing is done with Cedral finishing planks, these planks are to be visibly fastened with Cedral visible screws in each substructure.

Visible Screw
Close

Border distance

The minimum distance of a cutout should be 63 cm. This corresponds to 3 substructure timbers.

Close

Subconstruction

When installing the substructure, a slope of 1% must be planned. The center distance of the substructure of max. 315 mm must be observed.

Subconstruction
Close

Exit configurator

Are you sure you want to leave the configurator?

No Yes, I want to leave

Close

Watch the tutorial

Not sure where to start? Take a quick look at our tutorial. You can always open the tutorial via the icon in the right upper corner. Good luck creating your Cedral Terrace!

Proceed to the configurator